The linked files in the index below are PDF files and must be read with Adobe Acrobat Reader.

High Frequency Laminates Literature Index - 
updated 07/08/08

Product Data Sheets

• Antenna Grade Material Properties
• Bonding Film 3001 Properties
• RO3000® High Frequency Circuit Materials: RO 3003™, RO3006™, RO3010™
• RO3035™ High Frequency Circuit Material, Preliminary Data Sheet 
• RO3203™/RO3210™ High Frequency Circuit Materials:  RO3203™, RO3206™, RO3210™
• RO4000® High Frequency Circuit Materials: RO4003C™, RO4350B™. (rev. 05/2007)
• RO4403™/RO4450B™ /RO4450F™ Prepreg Data Sheet and Processing Guidelines (rev. 11/2007)
• RT/duroid® 5870/5880 Material Properties
• RT/duroid 6002 Material Properties
• RT/duroid 6202 Material Properties 
• RT/duroid 6202PR Materials - Preliminary Data Sheet
• RT/duroid 6006/ 6010LM Material Properties (rev. 05/2007)
• TMM® High Frequency Laminates
• ULTRALAM® 2000 Material Properties
• ULTRALAM® 3000 Liquid Crystalline Polymer Material Properties: ULTRALAM 3850 materials. 

Properties-Detailed
Characteristics

• RT 2.1.2.1
  The Advantage of Nearly Isotropic Dielectric Constant of RT/duroid 5870-5880 Glass Microfiber PTFE Composite
• RT 2.4.1
  A Study of Solder Temperature Effect of Copper Foil Adhesion to RT/duroid 5870 Material
• RT 2.4.3
  Copper Foils for Microwave Circuits
• RT 2.5.1
  RT/duroid PTFE-Based Composite Meets Flammability Requirements for Oxygen Environments
• RT 2.8.1
  Good Performance of RT/duroid Microwave Laminate in a Cyrogenic Stripline Application at NASA
• RT 2.9.1
  Low Outgassing Characteristics of RT/duroid Laminates Approved for Spacecraft Applications.
• RT 2.9.3
  The Effect of Exposure of RT/duroid PTFE-Based Composites to Nuclear Radiation.
• RT 2.9.4
  Reliability and Key Properties of RT/duroid 6002
• RT 2.9.5
  The Benefits of Selecting RT/duroid 6010LM for Band Pass Filters
• RO 2.9.7
  RO4003™ High Frequency Material Insertion Loss Comparison with Other Materials Types

Electrical Design Data

• RT 3.1.1
  Line Widths for Various Characteristic Impedance of Centered Stripline Devices in a Variety of RT/duroid Microwave Laminates
• RT 3.1.2 Tables
  Design Data for Microstrip Transmission Lines on RT/duroid Laminates
• RT 3.2.1
  Design Equations for Broadside and Edgewise Stripline
• RT 3.3.1
  Handling Continuous Power in Bonded Stripline of RT/duroid Laminates
• RT 3.3.2
  Temperature Rise Estimations RT/duroid Circuit Boards Carrying Direct or RF Current
• TM 3.3.3
  Design Data for Microstrip Transmission Lines on TMM Laminates

Fabrication Information

• Fabrication Guidelines: RT/duroid 5870/5880 and ULTRALAM 2000 High Frequency Circuit Materials (2/2003)
• Fabrication Guidelines: RT/duroid 6002/6006/6010 High Frequency Circuit Materials (rev. 4/2003)
• Fabrication Guidelines: RO4000 Series High Frequency Circuit Materials. (rev. 10/2007)
• RO4403™/RO4450B™/RO4450F™ Prepreg Datasheet and Processing Guidelines (rev.09/2007)
• Fabrication Guidelines for RO3000 Series High Frequency Circuit Materials.
• How to Avoid Creep on Board Assemblies
• After Etch Stress Relief in RT/duroid Microwave Laminates
• 3001 Bonding Film Properties and Bonding Techniques
• Bonding PTFE Materials for Microwave Stripline Packages and Other Multilayer Circuits (8/2005)
• Bending Etched Antenna Boards
• Device Attachment Methods and Wirebonding Notes for RT/duroid ®and RO4000® Series High Frequency Laminates  (rev. 8/2003)
• PTFE Safety Notes on Using RT/duroid Composite Material
• RT/duroid 6002 Microwave Laminates Direct Bonding
• The Prevention and Removal of Absorbed Chemicals in RT/duroid 6002 Microwave Laminates

• The Prevention of Extraneous Secondary Plating of RT/duroid® High Frequency Laminates

• Guidelines for Drilling RT/duroid 6002 Bonded Assemblies and Multilayer Boards
• ULTRALAM® 3000 Liquid Crystalline Polymer - Fabrication Notes (1/2007)
• TMM Fabrication Guidelines
• Antenna Grade Materials - Fabrication Guidelines

Technical Articles

• RT 5.3.1
  Rogers RT/duroid Material Provides Flexible Substrates in New Conical Antenna
• RT 5.3.2
  Thick Metal Cladding
• 5.4.1
  A Low Cost Laminate for Wireless Applications.

• Product Selector Guide (rev. 05/2008)
• Properties Guide 
• Published Articles
• Standard thickness, tolerance and panel sizes:  
  • RT/duroid,  ULTRALAM 2000 materials
  • RO3000, RO3200, RO4000 series materials.

ISO9001:2000 Certificate: pdf file.

Tech Tips:   Frequently asked questions and answers.

Attached is a form to have literature and samples sent to you.